XUTONG Metal · Wood · Export 中文 Request a quote
Five-axis CNC machining centre cutting an aluminium part

Precision in metal.
Patience in wood.

A 1,800 m² workshop in Zibo, Shandong that cuts stainless and aluminium to ±0.01 mm, and builds solid walnut tables by hand — under one roof, for one export market.

±0.01 mm
Typical machining tolerance, ±0.005 mm on request
3–5 axis
Milling and turning, prototype to 20,000 pcs
8–12 %
Kiln-dried moisture, checked before assembly
FOB Qingdao
Export packing, documents, container loading
01 — Capabilities

Two trades, held to the same discipline.

Metal buyers come for dimensional repeatability and clean paperwork. Furniture buyers come for joinery that survives a container and a showroom. Both rooms run the same rule: measure before you cut, report after you finish.

Precision machining

METAL DIVISION
Milling
3-axis, 4-axis and 5-axis vertical centres. Work envelope 1,200 × 600 × 500 mm, single set-up for five-sided parts.
Turning
CNC turning Ø3–Ø320 mm, bar feed 42 mm, with live tooling for cross holes and flats.
Tolerance
±0.01 mm typical; ±0.005 mm on critical bores and bores on request. Ra 0.8 µm standard, Ra 0.4 µm lapped.
Materials
6061 / 7075 aluminium, 304 / 316L stainless, 45# carbon steel, brass, POM, PEEK. Mill certificates kept per lot.
Finishes
Anodising (clear, black, hard), passivation, zinc and nickel plating, bead blasting, laser marking, assembly.
Volume & lead
From 5 pcs; 12–18 days after drawing approval, plus 5 days for first-article samples.

Send STEP, DXF or PDF — DFM notes come back with the quote at no charge.

Solid wood furniture

WOOD DIVISION
Species
American black walnut, white oak, ash — FSC-certified stock. No veneer, no MDF, no particle board.
Joinery
Mortise-and-tenon and floating-tenon frames, glued and clamped; screws only where a panel must be serviceable.
Moisture
Kiln dried and equalised to 8–12 %, measured on every board before it enters assembly.
Finish
Three coats of hard-wax oil, hand-applied and burnished; repairable on site, no lacquer film to peel.
Custom
Dimensions, edge profile, leg taper, shelf and drawer layout, laser-burned or inlaid branding.
Volume & lead
20 pcs per SKU; mixed containers welcome. 30–40 days after sample approval.

Sample in your finish is shipped before a production order starts.

02 — Products

What actually leaves the loading dock.

Six lines we run often enough to quote from a price list instead of a spreadsheet. Everything else is built to drawing.

CNC machined stainless brackets, flanges and ball screws on a grey bench
XT-M series · machined metal
Solid walnut tea table with visible mortise and tenon joints
XT-W series · solid walnut
SKU Item Material Key specification MOQ
XT-M-01 Mounting bracket, machined 6061-T6 aluminium Five-sided machining, ±0.02 mm, black anodised 50 pcs
XT-M-02 Flange, custom bore 304 / 316L stainless Turned, Ra 0.8, passivated, bore H7 100 pcs
XT-M-03 Ball screw set, SFU1605 Bearing steel + 6061 housing C7 lead 5 mm, 300–1,500 mm cut lengths 20 sets
XT-M-04 Mounting rail, solar / AC Hot-dip galvanised steel 41 × 41 × 2.0 mm, punched and cut to length 500 m
XT-W-01 Tea table, 1,200 mm American black walnut Mortise-and-tenon frame, hard-wax oil 20 pcs
XT-W-02 Console table, 1,400 mm Walnut top, oak base Two drawers, rounded edge, oil finish 20 pcs

Specifications above are the standard build. Sizes, tolerances, finishes and packing can be changed to your drawing — the price moves, the inspection routine does not.

03 — Quality

Every lot ships with numbers, not adjectives.

Inspection is a station on the route, not a final opinion. Material comes in measured, parts are checked at set-up, and nothing is packed until the last dimension on the drawing has a recorded value.

Inspector measuring a machined stainless part on a coordinate measuring machine
  • CMMBridge-type coordinate measuring machine, 0.001 mm resolution. First article measured in full; sampling at 10 % during production.
  • SurfaceRoughness tester across Ra 0.05–10 µm, recorded on the report for sealing faces and bores.
  • HardnessRockwell and Vickers checks on heat-treated steel, with the heat-lot number kept on file.
  • WoodPin-type moisture meter on every board; joint pull-test on the first frame of each batch.
  • ColourFinish panel and wood-grain master signed off before production, kept as the reference for the lot.

What arrives with the goods

Dimensional report per lot, material certificate to EN 10204 3.1 on request, finish or colour panel, and a packing list with photographs of the actual cartons before the container is sealed.

04 — Process

From drawing to FOB, in six steps.

No step is skipped because an order is small. A 5-piece prototype and a 20,000-piece run take the same route through the shop, just at different speeds.

Day 0

Drawing and RFQ

You send STEP, DXF, PDF or a physical sample. We confirm material, finish, quantity and destination port before quoting.

48 hours

Quote with DFM notes

Price, lead time and packing cost in one sheet. Where a drawing cannot be made economically, we say which feature costs the money and offer the alternative.

3–5 days

Sample and first-article approval

A sample or FAI part ships with its measurement report. Production starts only on your written approval — not on a verbal yes.

12–40 days

Production

Metal runs 12–18 days after approval; furniture 30–40 days including finishing time between coats. A progress photograph is sent mid-batch.

2 days

Pre-shipment inspection

AQL 2.5 sampling for visual, dimensional and function checks. You receive the report before we book the container, and a third-party inspection is welcome.

On booking

Export packing and loading

Cases and pallets packed to the packing list, loaded and photographed at the Zibo yard, then trucked to Qingdao for FOB or CIF shipment.

05 — Export

Packed for a container, documented for customs.

Most claims come from packing, not machining. Both divisions pack to a written standard, and the photographs taken at loading are the record if anything arrives damaged.

Metal parts

  • Oiled and wrapped in VCI film per part or per bundle
  • Foam-separated layers in a plywood case, fumigation-free
  • Case weight and dimensions stencilled, packing list inside
  • Barcode label per carton on request for warehouse intake
Plywood cases · ISPM-15 compliant

Furniture

  • Corner protectors, stretch film and 5-layer carton per piece
  • Legs and edges foamed; knock-down packing for flat rates
  • Loading plan drawn to container size before booking
  • Carton marking with your SKU, barcode and carton number
Stackable to 6 high · 20' / 40' HQ plan

Terms and documents

  • FOB Qingdao, CIF and DAP quoted on request
  • Commercial invoice, packing list, B/L, certificate of origin
  • Mill certificates, inspection report, insurance certificate
  • T/T 30 % deposit; balance against B/L copy. L/C at sight accepted.
Qingdao port · three hours by road
06 — Workshop

A machine shop that also keeps a wood floor.

Xutong began as an engraving and signage workshop, where the tools were already sharp and the tolerance talk was already daily. The machining floor and the furniture bench grew out of that same habit: measure, cut, check, record.

Craftsman sanding the edge of a solid walnut table by hand

The metal floor runs 3-axis and 5-axis machining centres with a turning cell beside them. Parts are programmed from your STEP file, fixtured on soft jaws or a dedicated plate, and inspected at the machine before they leave it.

The wood floor is slower on purpose. Boards are selected for grain and colour, jointed by hand, and left to settle between finishing coats. Where a client wants both — a machined steel base under a walnut top — the two floors meet at one assembly bench.

One contact quotes, schedules and reports on both, in English, from the first drawing to the bill of lading.

1,800 m²
Workshop, Zibo, Shandong
26
Staff, machining and woodwork
2012
Year the workshop opened
14
Export markets since 2018
07 — Contact

Send the drawing. Get a number back.

Attach a STEP, DXF, PDF or a photo with dimensions. Quotes are answered within 48 working hours, including a note on anything in the drawing that will add cost.

Goes straight to sales@xutongmfg.com and is answered within 48 working hours. Attach drawings or 3D files by replying to our answer.

Or write directly

PHONE / WHATSAPP
+86 138 6939 7778
ADDRESS
Zibo, Shandong Province, China
Workshop visits by appointment
PORT OF LOADING
Qingdao (CNTAO) · FOB / CIF
HOURS
Mon–Sat, 08:30–18:00 (GMT+8)